• Reliable 19" international structure, Double wall  type 

• Front   single  solid metal door with handle lock

• Enhance door hinges with 130 degrees operation angle

• Side solid metal door with lock

• Rear single solid metal panel

• Top with 2/8 fans for airflow&cooling, fan size: 120*120*38 mm

• Several lockable wiring holes on top/bottom, size of the large hole at the bottom adjustable

• Varies specification upon customers' special requirements

• with 1 pc of lighting system,smoke alarm,temperature sensor

Width: 600,800 mm

Depth: 600,800mm

Height: 12U, 17U, 22U, 27U, 32U, 37U, 42U, 47U

Customized size is available

Flexible packing methods allows for convenient stocking and end user delivery.




Standard and Material:

Comply with

ANSI/EIA,RS-310-D;IEC297-2;DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 standard and ETSI standard.

 

Surface Finish:Degrease, acid pickling, rust prevention and parkerizing,pure water cleaning, static electricity powder coating 


Material:SPCC cold rolled steel or Zink-plated panel or stainless steel

 

Thickness:Mounting profile:2.0mm,others: 1.50mm




IP degree: IP-55


Color:Body color:RAL5012(Top cover and base);RAL7035(The others)




NO.	Item	600 wide	800wide	Materials	Treatment	Note
1	Frame	2	2	1.5mm SPCC steel	Powder coating
2	Front Door	1	1	solid metal	\	double wall type
3	Side Door	1	1	\	\
4	Back Door	1	1	solid metal	\	double wall type
5	Lock	4	4	\	\	Handle Lock
6	Top cover	1	1	1.5mm SPCC steel	Powder coating
7	Rear door panel	1	1	1.5mm SPCC steel	Powder coating
8	Fan unit	1	1	1.2mm SPCC steel	Powder coating
9	Ac  fan	2-8	2-8	\	\	D>800,6-8pcs
10	Bottom panel	1	1	SPCC T=2.0	Powder coating
11	Earthing bolts	1	1	SPCC T=1.5	\	25 cm
12	Castors tray	\	\	SPCC T=2.5	Powder coating
13	Castors	\	\	\	\
14	Ajustable feet	\	\	\	\
15	Mounting angle	2	2	SPCC T=1.5	Powder coating
16	19inch rails	4	4	SPCC T=2.0	Powder coating
17	Cable management	\	2	SPCC T=1.5	Powder coating	Only for 800 W

.

Reference picture:

OPERATION CONDITIONS

• Must be protected against:
– Mechanical damage
– Improper handling
– A different usage than the cabinet is intended for

• Improper handling is especially:
– Overloading (maximum recommended load exceeding)
– Device installation that can influence negatively operation and function of the cabinet or the installed equipment
– Change of the construction or design of the cabinet

INSTALLATION OF THE CABINET

• To ensure the maximum recommended load, it is necessary to distribute the load equally.
• Place the cabinet on a flat floor and adjust any differences using the levelling feet.
• To avoid dust penetration in the case where cables lead through some of the cable openings, it may be sealed with a blanking panel with a brush or secured by a plastic frame (both can be purchased from us).

ENVIRONMENTAL PROTECTION

• All parts are made of recyclable materials and after decommissioning the cabinet, it must be disposed of according to relevant regulations.

CERTIFICATE AND CONFORMITY    

• This product is fully in accordance with CE & RoHS.