Note:

A. Suffix Xn denotes fiber tyoe
B. The colour arrangements of fiber and tube are specified in the colour identification cable
C. The nominal value of the PE sheath thickness: the cable core--1.5mm, the suspension--1.0mm
D. The suspension steel wires have two different dimensions with diameters of 1.2mm and 1.6mm

----------------------------------------------------------------------------------
Discription

The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic . The tubes are filled with a water-resistant filling compound. A steel wire,locates in the center of core as a metallic strength memeber ,

The tubes(and fillers)are stranded around the strength member into a compact and circular cable core.After an aluminum polyethylene laminate(APL) moisture barrier is applied around the cable core,the part of cable accompanied with standard wires as the supporting part are comleted with a polyethylene(PE) sheath to be figure 8 structure. Figure8 cable GYTC8Y ,GYTC8S are also available on request.This type of cable is specifically applied for self-supporting aeral installation

------------------------------------------------------------------------------------
Features:

* High tensile strength of standard wires meet the requirement of self-supporting and reduce the installation cost
* Good mechanical and temperature performance

* High strength loose tube that is hydrolysis resistant

* special tube filling compound ensure a critical protection of fiber

* The following measures are taken to ensure the cable watertight:

Steel wire used as the central strength member

Loose tube filling compound

100% cable core filling

APL moisture barrier

-------------------------------------------------------------------------------------

Standards:

Comply with YD/T901-2009 as well as IEC 60794-1